WIRELESS CHARGING IN THE NEWS

Home > news > COMPANY NEWS

Wireless Enabling

Infinite Possibilities

+86 18678901310

Enquire Now

The WIRELESSPT wireless charging station for intelligent patrol robots has been launched. The energy replenishment for security protection in industrial parks, chemical parks, logistics parks, substat

Time:2026-11-10 15:58:46 Click:

In industrial parks, chemical parks, logistics parks, substations, and smart parks, intelligent patrol robots are increasingly taking over perimeter security, equipment inspection, environmental monitoring, and video review. However, when the project was implemented, it was discovered that the intelligence in the inspection part was quite good, but the charging part still relied on human intervention: the contact charging gun's prongs would wear out, oxidize, accumulate dust and moisture, and then cause poor contact; if the parking position was off by a little, it couldn't charge; the maintenance still required a trip to the site. The 7×24-hour patrol plan was thus interrupted. WIRELESSPT has addressed this issue with a dedicated wireless charging station, using mature magnetic coupling resonance technology to transfer energy to the robots themselves.

The working conditions of patrol robots and indoor AGVs are very different. They operate in the open air, exposed to rain, humidity, dust, and some are deployed in chemical and power plant areas. The metal contacts in contact charging are repeatedly rubbed, which easily causes sparks; after being exposed to the sun, rain, and wind for a long time, the contacts corrode and accumulate dust, leading to a continuous increase in failure rates, and the maintenance workload also increases. The wireless charging station adopts an uncontacted architecture, with no electrical connection between the transmitting end and the on-board receiving end. There are no ignition, wear, or oxidation failures, and it is applicable for both indoor and outdoor deployment.

The hardware follows WIRELESSPT's consistent industrial-grade approach: the casing is dustproof and waterproof, and the protection level is selected based on outdoor conditions. Rain, morning dew, and sand and dust do not affect usage. A large margin of error is left for positioning, and the robot does not need to stop precisely at the millimeter level. The navigation can return to the point and couple stably even if the position is off a little, reducing the pressure of navigation debugging. Failures in parking and power replenishment are reduced - the wheeled chassis is prone to skidding and has positioning errors, which is a key point.

The power ranges from 180W to 6000W. Small-scale park patrol, explosion-proof inspection, and large-load security protection models can all select the appropriate gear. The mainstream battery voltages of 24V and 48V are also supported. The system includes FOD (foreign object) detection, temperature monitoring, and battery communication linkage: if a metal foreign object falls in the charging area, the energy transmission will stop immediately to prevent it from heating up; the entire process is linked with BMS (Battery Management System) and adjusts power as needed, stopping automatically when fully charged. The operation data can be sent to the dispatch platform, and the charging records and equipment status can be viewed remotely. Faults can be detected in advance, and the frequency of on-site visits is also reduced.

This charging station has another practical feature: opportunistic charging. Set up several small charging points along the patrol route, and the robot can replenish a little during the patrol break or when checking the points. There is no need to return to the main charging station when the battery level is low for a long distance; "charging while moving" increases the coverage of a single patrol, and the dispatch is more flexible. Whether it is a new smart security project or an upgrade of existing robots, WIRELESSPT can provide the selection and structural integration solutions for the receiving end, and different brands and sizes of complete machines can be adapted. No major changes to the main body structure are required.

During its years of industrial wireless charging, WIRELESSPT's product line has grown based on special scenarios - explosion-proof, outdoor, waterproof, and clean. This patrol robot charging station fills the last link in the security loop, reducing the labor costs for security in factories, parks, and power plants, and improving the response to abnormal events. The deployment of security unmannedization will continue, and the stability of power replenishment directly determines how many patrol robots can be deployed.

 


RECENT POSTS

TOP
  • Consultation
  • Phone

    +86 18678901310

  • WeChat

    二维码

  • Free Call